Super Lowest Price Iv Fluid Pump - KL-8052N Infusion Pump – KellyMed
Super Lowest Price Iv Fluid Pump - KL-8052N Infusion Pump – KellyMed Detail:
FAQ
Q: Are you the manufacturer of this product?
A: Yes, since 1994.
Q: Do you have CE mark for this product?
A: Yes.
Q: Is you company ISO certified?
A: Yes.
Q: How many years warranty for this product?
A: Two years warranty.
Q: Date of delivery?
A: Normally within 1-5 working days after payment received.
Specifications
Model | KL-8052N |
Pumping Mechanism | Curvilinear peristaltic |
IV Set | Compatible with IV sets of any standard |
Flow Rate | 0.1-1500 ml/h (in 0.1 ml/h increments) |
Purge, Bolus | 100-1500 ml/h (in 1 ml/h increments)
Purge when pump stops, bolus when pump starts |
Bolus volume | 1-20 ml (in 1 ml increments) |
Accuracy | ±3% |
*Inbuilt Thermostat | 30-45℃, adjustable |
VTBI | 1-9999 ml |
Infusion Mode | ml/h, drop/min, time-based |
KVO Rate | 0.1-5 ml/h (in 0.1 ml/h increments) |
Alarms | Occlusion, air-in-line, door open, end program, low battery, end battery,
AC power off, motor malfunction, system malfunction, standby |
Additional Features | Real-time infused volume / bolus rate / bolus volume / KVO rate,
automatic power switching, mute key, purge, bolus, system memory, key locker, change flow rate without stopping the pump |
Occlusion Sensitivity | High, medium, low |
Air-in-line Detection | Ultrasonic detector |
Wireless Management | Optional |
Power Supply, AC | 110/230 V (optional), 50-60 Hz, 20 VA |
Battery | 9.6±1.6 V, rechargeable |
Battery Life | 5 hours at 30 ml/h |
Working Temperature | 10-40℃ |
Relative Humidity | 30-75% |
Atmospheric Pressure | 700-1060 hpa |
Size | 174*126*215 mm |
Weight | 2.5 kg |
Safety Classification | Class Ⅰ, type CF |
Product detail pictures:
Related Product Guide:
Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for Super Lowest Price Iv Fluid Pump - KL-8052N Infusion Pump – KellyMed , The product will supply to all over the world, such as: Armenia, Latvia, Greece, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Liz from Czech Republic - 2017.06.29 18:55
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Lulu from Tunisia - 2017.08.18 11:04
Write your message here and send it to us