factory low price Blood Transfusion Infusion Pump - ZNB-XD Infusion Pump – KellyMed
factory low price Blood Transfusion Infusion Pump - ZNB-XD Infusion Pump – KellyMed Detail:
FAQ
Q: Do you have CE mark for this product?
A: Yes.
Q: Type of infusion pump?
A: Volumetric infusion pump.
Q: Does the pump have pole clamp to be installed on an Infusion Stand?
A: Yes.
Q: Does the pump have alarm of infusion completion?
A: Yes, it is finish or end program alarm.
Q: Does the pump have inbuilt battery?
A: Yes, all of our pumps have inbuilt rechargeable battery.
Specifications
| Model | ZNB-XD |
| Pumping Mechanism | Curvilinear peristaltic |
| IV Set | Compatible with IV sets of any standard |
| Flow Rate | 1-1100 ml/h (in 1 ml/h increments) |
| Purge, Bolus | Purge when pump stops, bolus when pump starts, rate at 700 ml/h |
| Accuracy | ±3% |
| *Inbuilt Thermostat | 30-45℃, adjustable |
| VTBI | 1-9999 ml |
| Infusion Mode | ml/h, drop/min |
| KVO Rate | 4 ml/h |
| Alarms | Occlusion, air-in-line, door open, end program, low battery, end battery,
AC power off, motor malfunction, system malfunction, standby |
| Additional Features | Real-time infused volume, automatic power switching,
Mute key, purge, bolus, system memory |
| Occlusion Sensitivity | 5 levels |
| Air-in-line Detection | Ultrasonic detector |
| Wireless Management | Optional |
| Power Supply, AC | 110/230 V (optional), 50-60 Hz, 20 VA |
| Battery | 9.6±1.6 V, rechargeable |
| Battery Life | 5 hours at 30 ml/h |
| Working Temperature | 10-40℃ |
| Relative Humidity | 30-75% |
| Atmospheric Pressure | 700-1060 hpa |
| Size | 174*126*215 mm |
| Weight | 2.5 kg |
| Safety Classification | Class Ⅰ, type CF |
Product detail pictures:
Related Product Guide:
We always believe that one's character decides products' quality, the details decides products' quality ,with the REALISTIC,EFFICIENT AND INNOVATIVE team spirit for factory low price Blood Transfusion Infusion Pump - ZNB-XD Infusion Pump – KellyMed , The product will supply to all over the world, such as: kazakhstan, Denver, Canada, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Kama from Hongkong - 2018.06.09 12:42
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Antonia from Muscat - 2018.12.25 12:43
Write your message here and send it to us
